New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Parkland pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Sliding & Patio Doors in Sunrise, FL - What They Cost and What Compliance Actually Takes
A new impact sliding glass door installed in Sunrise typically runs $2,800-$5,500 for a standard 6-foot opening, while full patio door replacements in 1970s condo stock like Sunrise Lakes can reach $6,500-$9,500 when HOA-mandated bronze frames, Low-E glazing, and zero-threshold transitions are specified. Every replacement in Broward County’s High Velocity Hurricane Zone must carry Florida Product Approval and match HVHZ design-pressure ratings of 175 mph equivalent or higher - no exceptions, even miles inland. Call (754) 205-3820 and we’ll bring the written price to your door; estimates are free, and the quote you sign is the invoice you pay.
Fast, Reliable Sliding & Patio Doors Across Sunrise
We measure, quote, and install sliding and patio doors across Sunrise from our Miami-area office, with crews running daily routes through Sunrise Lakes, Sunrise Golf Village, and the Welleby corridor. Most Sunrise homeowners who call us are staring at a 1970s aluminum slider that no longer seals, or they’ve just received an HOA violation notice for corroded frames, or they’re replacing a door ahead of a sale and discovered the original unit has no Florida Product Approval number.
Our Sliding & Patio Doors team handles the full sequence: measured survey, product specification against your HOA’s architectural requirements, permit submission with concurrent HOA approval, and installation by background-checked, uniformed technicians who arrive with license numbers visible. You keep the measured survey. We keep the documented photo record. The price on the page - Haven Clause 1 - is the price on the final invoice.
Sunrise sits at a frustrating intersection for door replacement. The housing stock is old enough that original units are failing. The code is strict enough that cheap non-impact products are illegal. And the HOA layers in Sunrise Lakes-style communities add a third approval gate that contractors from Plantation or Tamarac often miss entirely. We’ve been working this specific triangle since 2012.
Before
AfterWhy Sightline Windows & Doors Parkland Is Sunrise’s Preferred Sliding & Patio Doors Company
Sightline is independently owned and operated under the Haven Standard, which has governed every one of our 18,000+ installations since 2012. In Sunrise, that standard shows up as documented evidence, not promises. The measured survey you keep. The written price before any tool is lifted. The photo record when the job is done. The 365-Day Done Right Promise stamped on every contract - if it’s not done right, we make it right.
Our crews know Sunrise’s specific compliance stack. Florida Product Approval for HVHZ impact resistance is layer one. Broward County permit compliance is layer two. But in Sunrise Lakes and similar 55+ HOA phases, layer three - architectural review committee sign-off on frame color, finish, and exact glass spec - must precede the permit submission or the city auto-flags the application. We run HOA and permit processes concurrently, not sequentially. That difference alone has saved our Sunrise customers weeks of delay.
Calls to (754) 205-3820 are answered by a live person, 24/7. No voicemail queue. No callback window. The person who answers can schedule your measured survey, explain your HOA’s likely requirements, or review a competitor’s written estimate through our Free Second Opinion program.
Our Sliding & Patio Doors Services in Sunrise
Impact Sliding Glass Doors
Every impact sliding glass door we install in Sunrise carries Florida Product Approval and is rated for HVHZ wind speeds of 175 mph or higher. We specify from PGT, CGI, CWS, ES Windows, and ECO Window Systems - matched to your opening’s design pressure in PSF, never exceeding +/-100. In Sunrise Lakes phases, we verify the HOA’s approved color palette before ordering; bronze and white are common mandates, and a mismatched frame means a rejected permit. The laminated glass interlayer stops large-missile debris and reduces exterior noise from Sunrise Lakes Boulevard traffic.
Sliding Glass Door Replacement
Replacement of original 1970s single-pane aluminum sliders is our most common Sunrise call. The corroded tracks and failed rollers are the first failure mode - the door stops sealing, cooling costs spike, and wind-driven rain intrudes during summer storms. We remove the old unit, verify the rough opening for square and level, and install the new impact-rated slider with a zero-threshold transition where aging-in-place needs require it. The old unit’s lack of Product Approval means it cannot be reinstalled or matched; the replacement must be a current HVHZ-rated product.
Patio Doors
Sunrise’s CBS construction and shared exterior walls in condo communities mean patio door replacement affects structural openings, not just trim. We measure the rough opening, specify the header capacity, and confirm whether the existing wall can support the new door’s weight and wind load without modification. In single-family ranch homes near Sunrise Golf Village, we often have more flexibility with opening size and configuration. In mid-rise condos, the association’s master policy and your individual HO-6 coverage may both be involved; we document everything for both.
Impact French Patio Doors
Impact French patio doors in Sunrise combine the aesthetic of divided-light styling with HVHZ compliance. The multi-point locking hardware and reinforced stiles are standard, not upgrades. We specify these from PGT and Therma-Tru where the opening width allows hinged operation without encroaching on interior circulation - critical in Sunrise’s smaller 1970s condo floor plans. The fixed sidelight or transom above must carry matching Product Approval numbers or the assembly fails inspection.
Screen Door Installation
Screen doors for impact sliders are available in rolling or sliding configurations, specified to the exact track dimension of the primary door. We do not install screens as standalone products; they are ordered with the impact unit to ensure track compatibility and wind-load transfer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We draw from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by what your Sunrise opening requires, not by what is in our warehouse. For Sunrise’s 1970s condo stock, we commonly specify PGT and CGI for their extensive Florida Product Approval library covering older rough-opening dimensions and HOA-mandated frame colors. CWS and ES Windows offer competitive U-factor and SHGC performance for homeowners prioritizing cooling-cost reduction. We do not push inventory; we match the product to the measured opening, the HOA spec, and your stated priority - impact rating, energy performance, or price.
Common Sliding & Patio Doors Problems We See in Sunrise Homes
- Corroded aluminum tracks and seized rollers in 1970s-1980s units. Sunrise’s original single-pane sliders have spent 40+ years in salt-air humidity. The tracks pit, the rollers flatten, and the door drags or jumps off the rail. The seal fails long before the glass cracks, driving up FPL bills and allowing rain intrusion during summer downpours.
- Missing or invalid Florida Product Approval on original doors. Pre-Andrew construction in Sunrise Lakes and Sunrise Golf Village predates HVHZ requirements. Those units cannot be permitted for replacement without upgrading to a current Product Approval number. We verify the existing unit’s status before quoting so you know exactly what compliance adds to the scope.
- HOA architectural rejection after permit submission. In Sunrise Lakes phases, a permit filed without prior HOA sign-off on frame color, finish, and glass type is automatically flagged. The job stalls for weeks with an open rough opening. We run HOA and city review concurrently - Haven Clause 2, Arrive on schedule - so the inspection date holds.
- Incorrect design pressure specification on impact replacements. A slider rated for 120 PSF installed in a Sunrise opening requiring 150 PSF fails inspection. We calculate design pressure from the opening height, exposure category, and mean roof height per ASCE 7-16, then specify the product that matches. Never above +/-100 PSF. Never a guess.
Pricing for Sliding & Patio Doors in Sunrise, FL
Standard 6-foot impact sliding glass door replacement in Sunrise: $2,800-$5,500 installed. Impact French patio doors in the same width: $4,200-$7,500. Full patio door replacement in Sunrise Lakes-style condos with HOA-mandated bronze frames, Low-E insulated glass, and zero-threshold transitions: $6,500-$9,500. Large or custom openings, multiple-panel sliders, or structural header modifications: $8,500-$14,000.
What moves the price in Sunrise: floor height (design pressure increases above the third story), frame material (aluminum vs. vinyl vs. thermally broken), glass package (Low-E, argon fill, laminated interlayer thickness), and the HOA compliance layer (architectural review fees, required engineer letters, color-matched custom finishes). We itemize every line in the written quote you receive at the measured survey. The quote and the invoice are the same document - Haven Clause 1, Have it in writing.
Call (754) 205-3820 to schedule your free measured survey and written estimate.
What Sliding & Patio Doors Costs in Sunrise
Impact windows and doors in Sunrise fall within these ceilings based on opening count, wind zone exposure, floor height, and frame material. A single impact sliding glass door in a ground-floor Sunrise Golf Village ranch: $2,800-$5,500. Large or custom openings with structural modifications: $2,500-$5,000 for the opening work, plus the door unit. Whole-home packages replacing all sliders and windows in a 1,800-square-foot Sunrise condo: $8,000-$25,000+.
The HVHZ designation means every product must carry Florida Product Approval; the “plus” on whole-home packages comes from opening count, floor height increasing design pressure, and whether your HOA requires custom finishes. We measure every opening, calculate the PSF requirement, and specify the exact product - no allowances, no change orders. The written quote you sign is the final invoice.
Schedule your free in-home measure. We bring the written price. You keep the survey.
Florida Pays You Back
Several programs reduce the net cost of impact sliding and patio door replacement in Sunrise. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades - the program sets final eligibility and award amounts. Florida’s sales-tax exemption applies to impact-resistant windows and doors, including the product cost of qualifying units. The federal 25C energy credit provides 30% of product cost, up to $600 per year, on qualifying energy-efficient configurations; consult your tax preparer for your specific situation.
After installation, a wind-mitigation inspection ($75-$150) documents the impact-rated opening protection for your insurance carrier. Windstorm-premium credits average around 25% on the windstorm portion of premiums, though carriers set final credits individually. We provide the Product Approval documentation and installation certificate your inspector and carrier require; we do not guarantee specific credit amounts.
We Also Serve Cities Near Sunrise
Our crews run daily routes through Sunrise and neighboring Parkland, Coral Springs, Coconut Creek, and Margate. Each city carries its own HOA landscape, permit timeline, and housing-stock character; we adjust the compliance sequence accordingly. If you’re comparing contractors across these markets, bring us any written estimate for our Free Second Opinion review.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Sunrise
Yes - and the HOA architectural review must be completed before the city of Sunrise will accept your permit application, not after. In Sunrise Lakes phases, the architectural committee maintains a written spec sheet covering approved frame colors (typically white or bronze), finishes, and glass types; a permit submission without this prior sign-off is auto-flagged and rejected. We run the HOA and permit processes concurrently so your installation date doesn’t slip. Call (754) 205-3820 and we’ll review your phase’s specific requirements at no charge.
No. Broward County’s location within Florida’s High Velocity Hurricane Zone makes impact-rated windows and doors mandatory on all new installations, regardless of distance from the Atlantic or Intracoastal. The 175 mph+ wind-speed design requirement applies uniformly; a non-impact product cannot receive Florida Product Approval for HVHZ use and will be rejected at permit. We specify only impact-rated sliders, French doors, and patio doors for every Sunrise opening. Call (754) 205-3820 for a written quote on compliant products.
Yes, typically substantially - especially when replacing a 1970s single-pane aluminum slider. Original Sunrise units have no thermal break, no Low-E coating, and failed weatherstripping that leaks conditioned air continuously. Modern impact sliders with insulated glass units, warm-edge spacers, and proper installation reduce solar heat gain (lower SHGC) and conductive loss (lower U-factor). The exact savings depend on your unit’s exposure, shading, and FPL rate tier; we specify glass packages optimized for west-facing and south-facing Sunrise openings. Call (754) 205-3820 to schedule a measure and see the spec sheet.
Yes, if the new door carries Florida Product Approval for HVHZ impact resistance and is installed with approved hardware and anchorage. The wind-mitigation inspector documents the Product Approval number, design pressure, and installation method; your carrier applies the opening-protection credit to the windstorm portion of your premium. Credits average around 25%, but individual carriers set final amounts. We provide all installation certificates and Product Approval documentation at completion. Call (754) 205-3820 and we’ll explain what your specific policy likely requires.
Expect a three-layer compliance job, not a simple swap. First, we measure the rough opening and verify structural capacity. Second, we specify an impact-rated replacement with Florida Product Approval and HVHZ design pressure matched to your floor height and exposure. Third, in HOA-governed phases like Sunrise Lakes, we secure architectural committee approval of frame color, finish, and glass type before permit submission. Installation day involves removing the old unit, verifying the threshold height for trip-free transition (critical for walker and wheelchair users), setting the new frame plumb and square, and sealing to the CBS wall. The documented photo record goes to you and to our file. Call (754) 205-3820 to start with the measured survey you keep.
Why the Three-Layer Compliance Sequence Matters in Sunrise
Because Sunrise Lakes and similar 55+ HOA phases require architectural review before the city will accept a permit, a sliding-door replacement in Sunrise is a three-layer compliance job - HOA color/finish/glass approval, Florida Product Approval, and HVHZ design pressure - not the two-layer job crews are used to in Plantation or Tamarac. Contractors who miss the HOA layer show up with a permit rejection and a frustrated customer staring at a hole in their wall.
In a Sunrise Lakes phase off Sunrise Lakes Boulevard, our crew replaced a 1970s single-pane aluminum slider and a jalousie side-light with a PGT impact sliding glass door in the HOA’s approved bronze frame and Low-E insulated glass unit. We pulled the HOA architectural approval and the permit concurrently so the inspection didn’t stall, then verified the threshold height so the unit’s zero-threshold transition stayed flush and trip-free for the couple’s walkers. The laminated glass interlayer and large-missile rating cleared both HVHZ and HOA spec on the first submission.
That sequence - concurrent, not sequential - is the difference between a door installed on schedule and a door delayed by weeks. We document every step. You keep the measured survey. The written quote is the invoice. Haven Standard, all five clauses.
Call (754) 205-3820 to schedule your free measured survey and written estimate for sliding and patio door replacement in Sunrise. Estimates are free. The price we write is the price you pay.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise and South Florida since 2012.
Sliding & Patio Doors in Nearby Areas
Six Reasons Homeowners Choose Sightline Windows & Doors Parkland
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Parkland Services
