New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Parkland pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Impact Windows & Doors in Sunrise, FL
Impact windows and doors installed in Sunrise typically run $800-$1,500 per opening for standard sizes, with whole-home packages starting around $8,000 and climbing past $25,000 for larger or custom configurations. Every unit must carry Florida Product Approval and a Miami-Dade NOA for High Velocity Hurricane Zone compliance, regardless of how far inland the property sits. In Sunrise’s dense 55+ condo communities, there’s a third layer: HOA architectural review must approve the exact frame color, glass spec, and product line before the city will accept a permit submission. Call (754) 205-3820 to schedule your free measured survey and written quote.
We serve Sunrise from our Miami-area scheduling office, with crews working locally across Broward County every day. Whether you’re in a single-family ranch off Nob Hill Road or a mid-rise condo phase near Sawgrass Mills, the same HVHZ rules apply, and the same documentation standards govern every opening we touch.
Why Sightline Windows & Doors Parkland Is Sunrise’s Preferred Impact Windows & Doors Company
Sightline has completed more than 18,000 window and door installations since 2012, every one with a written price before work started and a documented photo record when it finished. In Sunrise, that discipline matters especially. The city’s concentration of 1970s-1980s planned communities means original aluminum-frame sliders and jalousie windows are still in service decades past their useful life, and the HOA-governed permit process catches contractors who don’t know the local sequence.
Our Impact Windows & Doors team runs HOA architectural submittals concurrently with permit prep, not after. That’s the difference between a six-week install and a fourteen-week ordeal in Sunrise Lakes or Sunrise Golf Village. Our technicians are background-checked, uniformed, and identified by license number before arrival, Haven Clause 3, and every job carries the 365-Day Done Right Promise stamped under the Haven Standard.
Calls are answered by a live person, 24/7. Not a callback window. Not a voicemail queue.
Before
AfterOur Impact Windows & Doors Services in Sunrise
Impact-Resistant Windows
Every impact-resistant window we specify for Sunrise carries Florida Product Approval and a Miami-Dade NOA matched to the opening’s design pressure requirement. For the CBS construction that dominates Sunrise’s housing stock, we measure the actual wall thickness, frame condition, and anchoring substrate before quoting. The written price you receive reflects those readings, not a per-window guess. We draw from PGT, CGI, CWS, ES Windows, and ECO Window Systems lines, specified by what the opening requires, not by what is in stock.
Hurricane Impact Windows
Hurricane impact windows in Sunrise must meet 175 mph+ wind speed requirements under HVHZ code, even well west of I-75. Hurricane Wilma’s 2005 track proved why: the storm cut directly across Broward County, inflicting some of its worst damage on Sunrise’s western communities. We specify laminated glass interlayers, reinforced frames, and anchoring systems rated to the actual design pressure of each opening, never a generic product. For residents in Sunrise Lakes and similar 55+ phases, we factor single-level access and zero-threshold requirements into the specification.
Single Hung Impact Windows
Single hung impact windows are the workhorse replacement for original aluminum-frame units in Sunrise’s ranch homes and low-rise condos. The fixed upper sash and operable lower sash match the sightlines of most 1970s-1980s construction without requiring structural modification. In Sunrise Golf Village and similar single-family neighborhoods, we regularly replace corroded aluminum single hungs with vinyl or aluminum impact-rated units that carry improved U-factor and SHGC ratings for cooling load reduction. The measured survey documents the exact rough opening, frame depth, and anchor pattern before the quote is written.
Double Hung Impact Windows
Double hung impact windows offer operable upper and lower sashes, useful for Sunrise homes where cross-ventilation matters and where egress requirements apply to bedrooms. We see these specified frequently in multi-story condo phases where the upper sash needs to tilt in for cleaning from the interior. The design pressure rating, frame material, and hardware finish are all documented in the written scope before any order is placed. In HOA-governed communities, the frame color and glass spec are submitted to the architectural committee simultaneously with permit prep.
Horizontal Roller & Sliding Impact Windows
Horizontal roller and sliding impact windows replace the original aluminum sliders that dominate Sunrise’s condo stock. These units require precise sill slope and drainage plane detailing, especially in CBS construction where the original frame may have settled or corroded. We measure the actual sill condition, check for proper flashing integration with the stucco exterior, and specify the roller hardware and locking system by performance tier. For Sunrise Lakes residents, we coordinate the HOA submittal for frame color and glass type with the permit package so the city doesn’t flag the submission.
Wind Mitigation & HVHZ Code Compliance
Wind mitigation documentation in Sunrise requires more than installing impact-rated product. The Florida Product Approval, Miami-Dade NOA, and installation method must all align for the opening to qualify for insurance credits. We document every opening with photos, product labels, and permit sign-off, then provide the completed wind mitigation form for your carrier. The 25% average premium credit on the windstorm portion, after a qualifying inspection, typically offsets the inspection fee of $75-$150 within the first policy cycle.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We specify from eight manufacturer lines, but for Sunrise’s HVHZ requirements and HOA aesthetic constraints, we most often draw from CGI’s impact-rated aluminum series, CWS’s vinyl impact line, and ES Windows’ high-rise and mid-rise certified systems. Each carries the Florida Product Approval and Miami-Dade NOA documentation required for permit submission in Broward County. We don’t stock inventory and push it; we measure, then specify by what the opening requires. That means the frame color, grid pattern, and hardware finish you need for your HOA’s architectural committee are available without compromise.
Common Impact Windows & Doors Problems We See in Sunrise Homes
- Original aluminum-frame sliders with failed weatherstripping and corroded sill tracks. In Sunrise Golf Village and similar 1960s-1980s single-family stock, these units leak air and water, conduct heat aggressively, and provide zero impact resistance. The frame itself is often too deteriorated to accept a standard replacement insert.
- Jalousie windows in 55+ condo phases that are structurally intact but entirely non-compliant. Sunrise Lakes and comparable communities still have thousands of these units. They cannot be retrofitted to HVHZ standards; full replacement with impact-rated horizontal rollers or single hungs is required, with HOA approval of the exact product and finish before permitting.
- Sliding glass doors with failed rollers, compromised locks, and single-pane glass. These are common in Sunrise’s mid-rise condos with shared exterior walls. Replacement requires matching the design pressure to the building height and exposure, plus coordinating with the HOA on frame color and glass spec for the architectural review.
- Permit submissions rejected for missing HOA architectural approval. This is the Sunrise-specific bottleneck we see most often. Contractors accustomed to Plantation or Tamarac pull permits straight through, only to have Sunrise flag the submission and restart the clock. We run the HOA process concurrently with permit prep, not after.
What Impact Windows & Doors Costs in Sunrise
| Service / Product | Typical Range in Sunrise |
|---|---|
| Standard impact window (per opening, installed) | $800 - $1,500 |
| Impact single-hung or horizontal roller | $900 - $1,800 |
| Large or custom openings (picture windows, sliders) | $2,500 - $5,000 |
| Whole-home package (typical 3/2 or condo) | $8,000 - $25,000+ |
| Wind mitigation inspection | $75 - $150 |
What moves the price in Sunrise: the number of openings, the floor height and exposure (design pressure increases with elevation), frame material selection, and whether the existing frame can accept an insert or requires full-frame replacement with stucco repair. In Sunrise’s 55+ condo phases, the HOA-mandated frame color or finish may limit product lines, affecting availability and lead time. Custom fabrication runs 4-6 weeks; standard units can be installed in as fast as a single day once they arrive.
Every engagement begins with a measured survey you keep. The written quote cannot differ from that document. Haven Clause 1.
Florida Pays You Back
The incentives stack for Sunrise homeowners who upgrade to impact-rated product, though programs and carriers set the final numbers. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit covers 30% of product cost, up to $600 per year on qualifying units. After installation and a wind-mitigation inspection, windstorm-premium credits average around 25% on the windstorm portion of the policy. We document every opening to support your claim; the photo record and permit sign-off travel with you.
We Also Serve Cities Near Sunrise
Our crews work across Broward County daily, and we regularly coordinate multi-unit projects in Sunrise alongside neighboring Parkland, Coral Springs, Coconut Creek, and Margate. Each city has its own permit workflow and HOA density, but the same Haven Standard governs every opening. If you’re comparing quotes across municipalities, bring us any competitor’s written estimate for a free second opinion.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Sunrise
Yes. In Sunrise Lakes and similar HOA-governed condo phases, the city will automatically flag a permit submission that lacks the HOA architectural committee’s prior written approval of the exact product, frame color, and glass type. We run the HOA submittal concurrently with permit prep, not after, to avoid the second submission cycle that costs most homeowners weeks. Call (754) 205-3820 and we’ll walk you through the documentation your HOA requires.
No. Sunrise sits within Florida’s High Velocity Hurricane Zone, which mandates 175 mph+ wind speed ratings on all new windows and doors regardless of distance from the coast. Standard non-impact product cannot legally be installed, and no reputable contractor will permit or install it. The design pressure rating on every unit we specify is matched to the opening and documented with Florida Product Approval and a Miami-Dade NOA.
Yes, typically. Most Sunrise homeowners see windstorm-premium credits averaging around 25% on the windstorm portion after a qualifying wind-mitigation inspection documents impact-rated openings with proper Florida Product Approval and installation method. We provide the photo record, product labels, and completed form for your inspector. Call (754) 205-3820 to schedule your measure and discuss how your specific policy and opening count may affect the credit.
Sometimes. In Sunrise’s CBS construction, the original aluminum slider frame is often embedded in the concrete block and stucco. If the rough opening is square, the anchor substrate is sound, and the existing frame depth matches current product lines, we can install a replacement insert. If the frame has corroded, settled, or been modified, full-frame replacement with stucco repair may be required. The measured survey determines which path applies; the written quote reflects the actual condition we find.
Yes, measurably. Low-E coatings reduce solar heat gain coefficient, which directly reduces the cooling load in Sunrise’s year-round warm climate. In single-level 55+ condos where the original single-pane aluminum units conduct heat aggressively, the difference is especially pronounced. The exact savings depend on the existing unit, the replacement’s U-factor and SHGC, and your cooling system’s efficiency. We specify the performance numbers on the written quote so you can compare product tiers directly.
Contact Sightline Windows & Doors Parkland
Call (754) 205-3820 to schedule your free measured survey and written quote. Every engagement begins with the survey you keep, and the written price cannot differ from that document. Our technicians are background-checked, uniformed, and identified by license number before arrival. Every completed job carries the 365-Day Done Right Promise and leaves a documented photo record. Haven Standard. No surprises.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise since 2012 under the Haven Standard.
Impact Windows & Doors in Nearby Areas
Six Reasons Homeowners Choose Sightline Windows & Doors Parkland
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Parkland Services