New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Parkland pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Windows & Doors in Fort Lauderdale, FL
Window installation in Fort Lauderdale starts around $650 per opening for standard vinyl and runs past $2,400 for HVHZ-compliant impact-rated units with marine-grade hardware, with most single-family homes in Coral Ridge and Rio Vista falling in the $1,200-$1,800 range once jalousie-to-modern conversions are factored. We replace the original single-pane aluminum and louvered windows still common in 1950s-1970s CBS homes across the city, pulling Miami-Dade NOA permits and documenting every frame reading in the photo record the customer keeps. Call (754) 205-3820 to schedule your measured survey, and we’ll hand you the written price before any work starts.
Why Fort Lauderdale Homes Are Different
Fort Lauderdale sits entirely within the High-Velocity Hurricane Zone, one of only two Florida counties where every window and door replacement must carry a Miami-Dade Notice of Acceptance or HVHZ-compliant Florida Product Approval. That code layer affects every job, from a single casement in Victoria Park to a full-opening conversion on Las Olas Isles.
The city’s 300-plus miles of inland waterways create a salt-air environment that attacks from two directions. Atlantic exposure on the east side and canal-side humidity on the interior mean standard hardware can corrode within a decade. We specify marine-grade fasteners and coastal-rated finishes on every Fort Lauderdale install, not as an upgrade but as baseline practice.
The housing stock compounds the challenge. CBS homes from the 1950s-1970s in Coral Ridge, Rio Vista, and Victoria Park still carry original single-pane aluminum or jalousie windows that are explicitly prohibited under current HVHZ code for any permitted scope. Contractors pulling permits in these neighborhoods routinely discover louvered units still in the frames, converting what owners expected as a simple swap into a mandatory full-opening replacement with structural reinforcement and Miami-Dade documentation.
Along the A1A corridor and Galt Ocean Mile, high-rise condominiums add HOA architectural review on top of city permitting, often doubling the administrative timeline. We coordinate both tracks simultaneously, submitting product approvals and color-match samples while the measured survey is still being drafted.
Before
AfterOur Main Fort Lauderdale Services
Fort Lauderdale homeowners call us most often for full window replacement and impact-rated protection. Here is what each service involves in this market.
Window Replacement in Fort Lauderdale
We replace original single-pane aluminum and jalousie windows in CBS homes throughout Coral Ridge, Rio Vista, and Victoria Park with HVHZ-compliant vinyl, aluminum, or impact-rated units. Every job starts with a measured survey that documents existing frame conditions, sightline measurements, and any structural reinforcement needed for Miami-Dade NOA compliance. The written quote matches that survey exactly. Window Replacement in Fort Lauderdale covers our full process for these conversions.
Impact Windows & Doors in Fort Lauderdale
Impact-rated installations in Fort Lauderdale require Miami-Dade NOA or Florida Product Approval specific to the HVHZ, not the standard approvals used in Tampa or Orlando. We specify PGT, CGI, and CWS product lines by performance tier and opening requirements, with marine-grade hardware for canal-side and oceanfront exposure. The measured survey includes design pressure calculations and fastening schedules. Impact Windows & Doors in Fort Lauderdale details our HVHZ compliance process.
Sliding & Patio Doors in Fort Lauderdale
Sliding and patio door replacement in Fort Lauderdale faces the same HVHZ mandate as windows, with the added complexity of threshold drainage in homes at or near sea level. We measure sill pan slope, weep hole placement, and track corrosion before specifying replacement units from our verified manufacturer lines. HOA color and grid restrictions along the A1A corridor are coordinated during the survey phase. Sliding & Patio Doors in Fort Lauderdale explains our measured approach.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Window Installation in Fort Lauderdale
Window installation in Fort Lauderdale is governed by the HVHZ code layer that exceeds standard Florida product approvals, and the city’s aging CBS housing stock means most jobs involve converting original single-pane aluminum or prohibited jalousie windows to modern, code-compliant units. We begin every engagement with a measured survey the customer keeps, documenting frame conditions, sightline measurements, and any structural reinforcement needed for Miami-Dade NOA compliance. Window Installation service details our full process for new and replacement openings.
Single & Double Hung Windows
Signs you need it
Original single-pane aluminum units that rattle in wind, show oxidation at the sill, or no longer lock securely are common in 1960s CBS homes throughout Victoria Park and Coral Ridge.
What it costs in Fort Lauderdale
Standard vinyl single or double hung installation runs $650-$1,400 per opening; impact-rated HVHZ-compliant units with marine-grade hardware range $1,200-$2,400.
How we do it
We remove the existing frame, inspect the CBS rough opening for spalling or rebar exposure, install a flashed sill pan with proper slope to the exterior, set the new unit with Miami-Dade NOA fasteners on 8-inch centers, and document the sightline and sealant bead in the photo record.
Horizontal Roller Windows
Signs you need it
Rollers that grind, tracks corroded from salt air, or frames that leak during Fort Lauderdale’s summer deluges indicate the unit has exceeded its service life.
What it costs in Fort Lauderdale
Horizontal roller replacement in standard vinyl starts at $700-$1,500; impact-rated HVHZ units with coastal hardware run $1,300-$2,500 per opening.
How we do it
We measure the existing track width and sash weight, specify a replacement with stainless or marine-grade roller assemblies, verify the weep system drains to the exterior, and record the operating force and lock engagement before the customer signs the completion document.
What Window Installation Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Standard vinyl single/double hung | $650 - $1,400 |
| Impact-rated single/double hung | $1,200 - $2,400 |
| Horizontal roller (impact-rated) | $1,300 - $2,500 |
Do I need impact-rated windows for a replacement in Fort Lauderdale?
Yes. Fort Lauderdale’s HVHZ designation requires Miami-Dade NOA or HVHZ-compliant Florida Product Approval for every replacement window, regardless of size or location. Standard Florida product approvals used in Orlando or Tampa do not satisfy code here. Call (754) 205-3820 and we’ll verify the product approval status of any unit you’re considering.
Will my jalousie windows trigger a full replacement requirement?
Yes. Jalousie windows are explicitly prohibited under current HVHZ code for any permitted scope of work in Fort Lauderdale, so their presence converts a planned partial replacement into a mandatory full-opening replacement with structural documentation. We identify this during the measured survey and price the full scope in the written quote.
Door Installation in Fort Lauderdale
Door installation in Fort Lauderdale must satisfy the same HVHZ code layer as windows, with the added complexity of threshold drainage in homes at or near sea level and the frequent discovery of non-compliant original frames in 1950s-1970s CBS construction. We specify entry and patio door systems from PGT, CGI, and Therma-Tru by performance tier and opening requirements, with marine-grade hardware for salt-air exposure. Door Installation service covers our measured approach for every door type.
Hurricane-Proof Front & Entry Doors
Signs you need it
Original hollow-core or un-reinforced entry doors in Coral Ridge and Rio Vista CBS homes show delamination, frame rot at the sill, or failed weatherstripping that admits wind-driven rain.
What it costs in Fort Lauderdale
HVHZ-compliant impact entry door systems with fiberglass or steel slab and marine-grade hardware range $1,800-$4,500 installed, depending on sidelite configuration and structural reinforcement needs.
How we do it
We measure the rough opening for square and level, specify a Miami-Dade NOA door unit with integrated frame and threshold, install with HVHZ fastening patterns, and document the sweep engagement and lockset function in the photo record.
French & Double Doors
Signs you need it
Double doors that have settled out of alignment, show daylight between the meeting stiles, or operate with binding at the header indicate frame failure or foundation movement common in coastal fill.
What it costs in Fort Lauderdale
French and double door replacement with HVHZ impact-rated units runs $2,200-$5,500, with multi-point locking hardware and integrated sidelites at the upper end.
How we do it
We assess the header for deflection, specify a reinforced frame with adjustable hinges and multi-point lock, verify the inactive door seals before the active door closes, and record the meeting stile gap and lock engagement.
What Door Installation Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Impact entry door (single, no sidelites) | $1,800 - $3,200 |
| Impact entry door with sidelites | $2,800 - $4,500 |
| French/double door (impact-rated) | $2,200 - $5,500 |
Do I need a permit to replace my front door in Fort Lauderdale?
Yes. Any door replacement in Fort Lauderdale requires a building permit with Miami-Dade NOA or HVHZ Florida Product Approval documentation. We pull the permit, submit the product approval, and schedule inspection as part of the written scope. Call (754) 205-3820 and we’ll confirm the permit timeline for your neighborhood.
Can you match my HOA’s color and grid requirements?
Yes. We coordinate color samples and grid patterns with HOA architectural committees during the survey phase, before the order is placed, and document the approved selection in the written scope to avoid revision costs.
Energy-Efficient Windows in Fort Lauderdale
Energy-efficient window installation in Fort Lauderdale addresses the extreme UV exposure and year-round humidity that degrade standard glazing and drive cooling loads in 1950s-1970s CBS homes still running original single-pane units. We specify low-E coatings, argon gas fills, and insulated laminated glass from our verified manufacturer lines by U-factor and SHGC performance, not by margin. Energy-Efficient Windows service details our performance-based specification process.
Low-E & Argon Gas Glass
Signs you need it
Furniture fading, excessive solar heat gain through west-facing openings, or condensation between failed single-pane units indicate the glazing package is overdue for upgrade.
What it costs in Fort Lauderdale
Low-E with argon gas fill in a standard vinyl frame runs $750-$1,600 per opening; impact-rated low-E/argon units for HVHZ compliance range $1,400-$2,600.
How we do it
We measure solar orientation and existing shading, specify a low-E coating with appropriate SHGC for the exposure, verify argon fill with a spark test on delivery, and record the U-factor label and installation date in the photo record.
Insulated Laminated Glass
Signs you need it
Street noise penetration, security concerns, or the need for impact protection combined with thermal performance point to insulated laminated construction.
What it costs in Fort Lauderdale
Insulated laminated glass units in non-impact vinyl frames range $900-$1,900; HVHZ-compliant impact-rated insulated laminated units run $1,600-$3,000 per opening.
How we do it
We specify the interlayer thickness and air gap based on acoustic and thermal requirements, verify the laminated lite orientation during fabrication, and inspect edge seals for delamination before installation.
What Energy-Efficient Windows Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Low-E/argon (standard vinyl) | $750 - $1,600 |
| Low-E/argon (impact-rated) | $1,400 - $2,600 |
| Insulated laminated (impact-rated) | $1,600 - $3,000 |
Will energy-efficient windows actually lower my cooling bill in Fort Lauderdale?
Yes. Replacing original single-pane aluminum windows with low-E/argon units in a typical 1,800-square-foot CBS home can reduce cooling load 15-25 percent, with greater savings on west and south exposures. The measured survey includes solar orientation analysis. Call (754) 205-3820 for a performance estimate.
Do impact-rated windows also qualify as energy-efficient?
Yes, when specified with low-E coatings and argon fill. Many Fort Lauderdale homeowners assume impact protection and energy performance are separate purchases, but PGT and CGI product lines we specify carry both Miami-Dade NOA and ENERGY STAR certification in the same unit.
Impact Garage Doors in Fort Lauderdale
Impact garage door installation in Fort Lauderdale is required by HVHZ code for any attached or detached garage on a residential property, with wind-load ratings that exceed standard Florida product approvals. The city’s salt-air environment from both Atlantic and canal exposure means standard hardware and torsion spring systems corrode rapidly, so we specify coastal-rated components as baseline practice. Impact Garage Doors service covers our full specification and installation process.
Hurricane-Rated Garage Doors
Signs you need it
Original non-rated garage doors in 1960s-1970s CBS homes show panel fatigue, failed bottom seals, or hardware corrosion that compromises wind-load resistance.
What it costs in Fort Lauderdale
HVHZ-compliant hurricane-rated garage doors with reinforced tracks and coastal hardware range $1,500-$3,800 for single-car openings and $2,200-$5,500 for double-car, depending on insulation and window lite options.
How we do it
We measure the opening for square and plumb, specify a Miami-Dade NOA door system with wind-load rating matched to the exposure category, install reinforced tracks and brackets with HVHZ fastening, and document the spring tension and auto-reverse function in the photo record.
Wind-Load Code Compliance
Signs you need it
Permit applications for any garage modification in Fort Lauderdale trigger HVHZ compliance review, and inspectors will reject non-NOA product documentation.
What it costs in Fort Lauderdale
Wind-load compliance verification and hardware upgrade on an existing impact-rated door runs $400-$900; full replacement with compliant system and permit coordination runs $1,500-$5,500 depending on opening size.
How we do it
We pull the permit, submit the Miami-Dade NOA product approval, install to the fastening schedule and reinforcement details in the approval document, and schedule inspection with the photo record and written scope on site.
What Impact Garage Doors Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Single-car hurricane-rated door | $1,500 - $3,800 |
| Double-car hurricane-rated door | $2,200 - $5,500 |
| Wind-load compliance verification/upgrade | $400 - $900 |
Does my detached garage need an impact-rated door in Fort Lauderdale?
Yes. HVHZ code applies to all residential garage doors in Fort Lauderdale, attached or detached, with no exemption for accessory structures. The wind-load rating must match the exposure category for the specific site. Call (754) 205-3820 and we’ll verify the requirement for your property.
Can I keep my existing opener with a new impact-rated door?
Sometimes. We test the existing opener’s lift capacity and safety systems during the measured survey; if the new door’s weight exceeds the opener rating or the auto-reverse fails, we specify a replacement as part of the written scope with no change orders.
Custom & Geometric Windows in Fort Lauderdale
Custom and geometric window installation in Fort Lauderdale combines the HVHZ code requirements that govern every opening with the architectural character that defines neighborhoods like Las Olas Isles and Coral Ridge. Arched, curved, and oversized units require Miami-Dade NOA approval for the specific configuration, not just the base product line, and HOA review along the A1A corridor adds a second approval layer. Custom & Geometric Windows service details our process for non-standard openings.
Geometric & Shaped Windows
Signs you need it
Original shaped windows in 1960s-1970s CBS homes have failed seals, distorted sightlines, or frames that no longer operate, and standard replacement units do not fit the rough opening.
What it costs in Fort Lauderdale
Custom geometric windows with HVHZ impact rating and marine-grade hardware range $1,800-$4,200 per opening, with trapezoids, hexagons, and compound curves at the upper end due to fabrication complexity.
How we do it
We template the existing opening with digital angle measurement, submit the geometry to the manufacturer for Miami-Dade NOA submittal, verify the fabricated unit against the template before delivery, and install with custom flashing to maintain the designed sightline.
Arched & Curved Windows
Signs you need it
Arched windows in Mediterranean and Spanish Revival homes throughout Rio Vista and Victoria Park show radius distortion, separated mullions, or water intrusion at the spring line.
What it costs in Fort Lauderdale
Arched and curved replacement units with custom radius and HVHZ impact rating run $2,200-$5,000 per opening, with true half-rounds and elliptical configurations at the upper end.
How we do it
We measure the radius at multiple points to verify consistency, specify a unit with matching profile and integrated nailing flange for the curved head, and document the sightline and sealant continuity in the photo record.
What Custom & Geometric Windows Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Geometric/shaped window (impact-rated) | $1,800 - $4,200 |
| Arched/curved window (impact-rated) | $2,200 - $5,000 |
| Oversized opening (custom engineered) | $3,500 - $7,500 |
Do custom windows take longer to approve in Fort Lauderdale?
Yes. Custom geometries require Miami-Dade NOA submittal for the specific configuration, which adds 2-4 weeks to the standard lead time, and HOA architectural review along the A1A corridor can add another 2-3 weeks. We coordinate both tracks simultaneously from the measured survey. Call (754) 205-3820 for a timeline based on your specific geometry and neighborhood.
Can you replicate the original sightline of my 1960s arched windows?
Yes. We template the existing unit before removal, measure the sightline dimensions and muntin profile, and specify a replacement that maintains the original proportions while meeting current HVHZ structural requirements. The template and measurements become part of the documentation the customer keeps.
Brands We Service in Fort Lauderdale
We specify from eight verified manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. In Fort Lauderdale, we stock PGT and CGI hardware and weatherstrip components locally for HVHZ-compliant service calls, with most non-stock parts available within 48 hours through our Miami South Florida distribution. our brands page lists performance tiers and warranty terms for each line.
Pricing for Windows & Doors in Fort Lauderdale, FL
| Service | Typical range in Fort Lauderdale |
|---|---|
| Standard vinyl window (single/double hung) | $650 - $1,400 |
| Impact-rated window (single/double hung) | $1,200 - $2,400 |
| Horizontal roller window (impact-rated) | $1,300 - $2,500 |
| Low-E/argon energy-efficient window | $750 - $1,600 |
| Impact low-E/argon window | $1,400 - $2,600 |
| Insulated laminated impact window | $1,600 - $3,000 |
| Impact entry door (single, no sidelites) | $1,800 - $3,200 |
| Impact entry door with sidelites | $2,800 - $4,500 |
| French/double door (impact-rated) | $2,200 - $5,500 |
| Single-car hurricane-rated garage door | $1,500 - $3,800 |
| Double-car hurricane-rated garage door | $2,200 - $5,500 |
| Custom geometric window (impact-rated) | $1,800 - $4,200 |
Prices in Fort Lauderdale push toward the upper end when jobs require jalousie-to-modern conversion with structural reinforcement, marine-grade hardware upgrades for canal-side exposure, or HOA-mandated color and grid customization. The written quote you receive before any work starts matches the measured survey exactly; Haven Clause 1 means the price does not change once the scope is set.
Neighborhoods We Serve in Fort Lauderdale
We install and replace windows and doors across Fort Lauderdale’s full residential range, from 1950s CBS homes to A1A corridor condominiums. Crews dispatch from our Miami South Florida office and typically arrive within the scheduled window across the metro area.
- Coral Ridge
- Rio Vista
- Victoria Park
- Las Olas Isles
- Galt Ocean Mile
Service Area - Cities Near Fort Lauderdale
Our crews serve the full Broward County metro from the Miami South Florida office, with measured surveys and installations available in Plantation, FL, Pompano Beach, FL, Coconut Creek, FL, and Margate, FL. Each city carries its own permit requirements and product approval standards; we verify compliance before the quote is written.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Fort Lauderdale
Fort Lauderdale building permits for window and door replacement typically issue within 5-10 business days when Miami-Dade NOA documentation is complete. HOA architectural review in A1A corridor condominiums adds 2-4 weeks. We pull the permit and coordinate both tracks as part of the written scope.
Yes. We submit color samples, grid patterns, and product approval documents to HOA architectural committees during the survey phase, before ordering, and document the approved selection in the written scope to avoid revision costs or installation delays.
We document the condition, explain the HVHZ prohibition on louvered units for any permitted scope, and revise the written quote to cover the mandatory full-opening replacement with structural reinforcement and Miami-Dade documentation. The customer keeps the original survey and the revised scope for comparison.
Six Reasons Homeowners Choose Sightline Windows & Doors Parkland
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Parkland Services
What Neighbors Say About Sightline Windows & Doors Parkland
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Lauderdale Customers Say
"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.