New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Parkland pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Sunrise
Window replacement in Sunrise runs $800-$1,500 per opening for standard impact-rated units, with whole-home packages typically falling between $8,000 and $25,000 depending on frame material, floor height, and whether the job requires full-frame removal or insert replacement. Most Sunrise homes need impact-rated products under Florida’s High Velocity Hurricane Zone code, and crews coordinated from our Miami office serve the city directly with measured surveys that become your written quote before any work starts. Call (754) 205-3820 to schedule your free in-home measure and written estimate.
We’ve worked across Sunrise’s 1970s and 1980s housing stock long enough to know the difference between a straightforward ranch in Sunrise Golf Village and a multi-phase condo in Sunrise Lakes where the HOA architectural board holds a veto over your frame color. That local knowledge matters when you’re staring at corroded single-pane aluminum sliders that haven’t met code since Hurricane Wilma rewrote the rules.
Why Sightline Windows & Doors Parkland Is Sunrise’s Preferred Window Replacement Company
Our crews have replaced windows in Sunrise Golf Village, Welleby, and every phase of Sunrise Lakes. We know which condo associations require matte bronze frames and which mandate white. We know the city permit office will flag a submission that lacks HOA architectural approval before the first review. That specificity shows up in our measured surveys and in the photo documentation you receive when the job closes.
Sunrise customers have left us reviews citing the same two details: the written price matched the final invoice, and the technician who arrived was the same person whose license number we texted the morning of the appointment. Haven Clause 3, Verified Crews, means no subcontractor roulette.
Dispatch and scheduling run from our Miami office, but Sunrise is a primary service corridor. We typically book measured surveys within a few days of contact, and installations move as fast as product delivery allows. Standard impact units from PGT or CGI ship in 4-6 weeks; custom geometric or oversized openings can run longer.
The difference between us and a crew that commutes from Palm Beach or Miami-Dade is simple: we’ve already navigated Sunrise’s three-layer compliance stack. We don’t learn your HOA’s requirements on your dime.
Before
AfterOur Window Replacement Services in Sunrise
Full Frame Replacement
Most 1970s and 1980s Sunrise condos need this. The original aluminum frames in Sunrise Lakes Phase 3, where we completed a full replacement last season, had corroded to the point where the sashes wouldn’t separate from the jambs. Insert replacement would have left gaps that compromise the large-missile impact rating. We pulled the entire assembly, installed new blocking, and set PGT impact-rated vinyl frames with low-E insulated glass that matched the HOA’s specified color and SHGC. Full-frame costs more upfront. It passes inspection. The alternative often doesn’t.
Insert Window Replacement
Insert replacement works when your existing frame is square, structurally sound, and free of corrosion. In newer Sunrise stock, or in ranch homes where the original aluminum hasn’t degraded, an insert can save $200-$400 per opening. We measure jamb squareness to 1/16 inch during our survey. If the frame won’t accept an insert cleanly, we tell you then, not after we’ve started demolition. Our Window Replacement team will flag this in the written scope before you sign.
Vinyl Replacement Windows
Vinyl dominates Sunrise’s replacement market for straightforward reasons: it doesn’t corrode in salt air, it insulates better than aluminum, and it meets HVHZ design-pressure requirements at a lower price point than aluminum-clad wood. We specify PGT and CGI vinyl lines by performance tier, not by what happens to be in the warehouse. A typical vinyl impact single-hung in Sunrise runs $900-$1,800 installed, depending on size, floor height, and whether the opening needs structural reinforcement.
Energy-Efficient Upgrade
South Florida cooling loads are brutal on single-pane aluminum. In a Sunrise condo with western exposure, we’ve measured interior surface temperatures 12 degrees lower after replacing original glass with low-E, argon-filled impact units. The upgrade pays back through reduced kWh consumption, and the documented U-factor and SHGC ratings support your Florida wind mitigation inspection. That inspection, in turn, feeds the insurance premium credit under Florida Statute 627.0629.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We specify from eight manufacturer lines, but in Sunrise’s condo and ranch stock we most often draw from PGT, CGI, and CWS. PGT’s WinGuard vinyl line carries Miami-Dade NOA numbers that satisfy both the city and the strictest HOA architectural boards. CGI’s Estate Collection meets the aesthetic requirements of communities that reject the institutional look of standard impact frames. CWS fills the mid-tier price band with Florida Product Approval documentation that accelerates permit review. We don’t stock inventory to move. We stock documentation to prove compliance.
Common Window Replacement Problems We See in Sunrise Homes
- Corroded aluminum sashes in 1970s-1980s condo units. The salt air and condensation cycles have fused sashes to jambs in Sunrise Lakes and similar phases. Insert replacement is physically impossible. We catch this during the measured survey, not during demolition.
- Non-impact glass in a 175 mph wind zone. Broward County’s HVHZ status means standard windows are illegal regardless of how far inland you sit. We’ve seen contractors from outside the county install non-impact products in Welleby, assuming distance from the coast matters. It doesn’t.
- Permits pulled before HOA architectural approval. In Sunrise Lakes and comparable 55+ communities, the city automatically flags any permit lacking prior written HOA sign-off on frame color, finish, and glass spec. The delay isn’t days. It’s weeks.
- Failed wind mitigation documentation. Original single-pane aluminum sliders carry no design-pressure rating. Without replacement documentation from a Florida Product Approved installation, you can’t claim the insurance credit you’ve already paid premiums to qualify for.
What Window Replacement Costs in Sunrise
| Product / Scope | Typical Range in Sunrise |
|---|---|
| Standard impact window (installed) | $800 - $1,500 |
| Impact single-hung, vinyl frame | $900 - $1,800 |
| Large or custom opening | $2,500 - $5,000 |
| Whole-home package | $8,000 - $25,000+ |
What moves the price in Sunrise: floor height (high-rise condo = higher labor), frame material (vinyl vs. aluminum-clad), opening count, and whether the existing frame can accept an insert or requires full-frame removal with new blocking. Every measured survey we perform becomes a written line-item quote you keep. The price on that document is the price on the final invoice. Haven Clause 1.
Call (754) 205-3820 for your free in-home measure and written estimate.
Florida Pays You Back
Several programs reduce the net cost of impact window replacement in Sunrise, though final eligibility rests with the program administrator or your carrier:
- My Safe Florida Home: Matching grants up to $10,000 for qualifying wind-mitigation upgrades, including impact window and door replacement.
- Florida sales-tax exemption: Impact-resistant windows and doors carry no state sales tax.
- Federal 25C energy credit: 30% of product cost, up to $600 per year, on qualifying energy-efficient units.
- Windstorm premium credits: Average roughly 25% on the windstorm portion of your premium after a passing wind-mitigation inspection, which runs $75-$150.
We document every product’s Miami-Dade NOA or Florida Product Approval number, U-factor, and SHGC on the written scope. That paperwork travels with you to your insurer and your tax preparer.
Pricing for Window Replacement in Sunrise, FL
The table above gives the honest ranges. What we add here: in Sunrise’s 55+ condo communities, the HOA architectural review process can add 2-4 weeks to project start if run sequentially with permitting. We run both concurrently, which costs nothing extra but saves calendar time. That’s not a discount. It’s competence.
Our written quotes include line-item breakdowns: product, labor, disposal, permit, and any structural remediation. No change orders unless you change the scope. The 365-Day Done Right Promise covers labor and materials; product warranties run separately by manufacturer and are transferable.
We Also Serve Cities Near Sunrise
Our crews work throughout central and western Broward, including Sunrise and neighboring Parkland, Coral Springs, Coconut Creek, and Margate. Each city carries its own permit rhythms and HOA landscapes. We adjust accordingly.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Sunrise
Yes. The city of Sunrise automatically flags any window permit that lacks prior written HOA architectural approval of the exact product, frame color, and glass type. We run the HOA board process concurrently with permit prep to avoid the second submission cycle that delays most out-of-area contractors. Call (754) 205-3820 and we’ll walk you through your association’s specific documentation requirements.
Yes. Broward County sits entirely within Florida’s High Velocity Hurricane Zone, which mandates 175 mph wind-speed design-pressure ratings on every new window and door regardless of distance from the coast. Standard non-impact products cannot legally be installed in Sunrise. Call (754) 205-3820 for a free measure and written quote on compliant impact-rated units.
Usually not. The original aluminum sashes in 1970s-1980s Sunrise stock have typically corroded to the point where they cannot be separated from the jambs without damage. Insert replacement on compromised frames leaves gaps that fail the large-missile impact test and won’t pass inspection. Our measured survey determines this definitively before you commit. Call (754) 205-3820 to schedule.
Yes, measurably. Low-E, argon-filled impact units reduce solar heat gain and conductive transfer compared to original single-pane aluminum. In western-exposure Sunrise condos, we’ve documented interior surface temperature drops of 10-15 degrees and corresponding kWh reductions. The exact savings depend on your unit’s orientation, insulation, and HVAC efficiency. Call (754) 205-3820 for a written estimate that specifies the U-factor and SHGC of your proposed products.
You need a passing wind-mitigation inspection by a licensed inspector, supported by product documentation showing Miami-Dade NOA or Florida Product Approval numbers, design-pressure ratings, and installation photos proving proper attachment. We provide all of this as standard on every job: the photo record, the written scope with product specifications, and the permit documentation. You take that packet to your inspector and insurer. Call (754) 205-3820 and we’ll explain what’s required for your specific policy.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise since 2012 under the Haven Standard.
Window Replacement in Nearby Areas
Six Reasons Homeowners Choose Sightline Windows & Doors Parkland
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Parkland Services