New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Parkland pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Delray Beach
Window replacement in Delray Beach runs $800-$1,500 per opening for standard impact-rated units, with whole-home packages typically between $8,000 and $25,000. Every job requires Miami-Dade NOA or Florida Product Approval impact ratings because the entire city sits inside Florida’s wind-borne debris region. Call (754) 205-3820 to schedule your free measured survey - the written quote you receive is the same document we use at installation.
Our crews serve Delray Beach from our Miami (South FL) office, carrying measured surveys, background-checked license numbers, and the Haven Standard that has governed every one of our 18,000+ installations since 2012. We know the difference between a Kings Point condo built in 1978 and a Lake Ida CBS home from 1965, and we specify accordingly.
Why Sightline Windows & Doors Parkland Is Delray Beach’s Preferred Window Replacement Company
We’ve replaced windows in Delray Beach’s 55-plus communities, its historic districts, and its Intracoastal-front neighborhoods. The reviews we receive from Delray Beach customers consistently cite two things: the measured survey they keep, and the photo record we leave behind. Our Window Replacement team does not quote from a truck or revise prices after work starts - Haven Clause 1 means the measurement and the quote are the same document.
Calls from Delray Beach are answered by a live person, 24/7. Our technicians are uniformed, background-checked, and identified by license number before arrival - Haven Clause 3, Verified Crews. Every completed job carries the 365-Day Done Right Promise written into the Haven Standard, not offered as a courtesy. And every job leaves a documented photo record as standard evidence, not an upsell.
Before
AfterOur Window Replacement Services in Delray Beach
Full Frame Replacement
Full frame replacement strips the existing frame, sill, and jamb back to the rough opening, then installs a new impact-rated unit with proper flashing and sealant integration. On Delray Beach’s 1960s-1980s CBS construction, this is often necessary because original aluminum frames are undersized by current Florida Building Code standards and the sill pans have corroded from decades of salt exposure. We were called to a Kings Point condo where the original single-pane aluminum slider had oxidized so badly that the sash wouldn’t seat against the jamb and the design pressure label had washed off. We pulled the frame and set a PGT impact-rated unit with laminated glass interlayer and stainless fasteners, matched the existing sill pan, and the owner’s wind mitigation report finally reflected an opening-protection credit. Same week, a Lake Ida CBS home got full-frame replacement with Low-E insulated glass units so the west-facing sliders stopped cooking the living room.
Insert Window Replacement
Insert replacement fits a new impact-rated sash and frame inside the existing window opening, preserving interior and exterior trim. This works when the original frame is structurally sound and properly flashed - rare in Delray Beach’s coastal condo stock, where salt air from both the Atlantic and Intracoastal Waterway has typically compromised the jamb. We assess frame condition with a moisture probe and sightline measurement before recommending this path. When inserts are viable, they reduce trim repair and permit complexity, particularly in Tropic Isle and Chatelaine neighborhoods where interior finishes are original.
Vinyl Replacement Windows
Vinyl frames resist salt corrosion better than original aluminum, and modern impact-rated vinyl units carry Miami-Dade NOA numbers with design pressures matched to Delray Beach’s wind zone. We specify vinyl from PGT, CGI, and CWS with multi-chambered profiles and fusion-welded corners - not the snap-together frames that deform under sustained wind load. For Delray Beach’s west-of-ICW properties, where afternoon sun hits hard, we specify heat-resistant exterior laminates that prevent profile distortion. The price gap between coastal-spec vinyl with stainless fasteners and inland-spec with zinc-plated hardware runs $40-$80 per opening, but the cheap spec costs more when the fasteners oxidize and the frame loosens in its opening.
Energy-Efficient Upgrade
Energy-efficient replacement in Delray Beach means Low-E coatings, argon-filled insulated glass units (IGUs), and warm-edge spacers rated for humid subtropical climates. The federal 25C energy credit covers 30% of product cost, up to $600 per year on qualifying units. But the real savings in Delray Beach come from SHGC reduction - Solar Heat Gain Coefficient - on west- and south-facing openings, where uncoated glass turns rooms into greenhouses by 2 PM. We measure each opening’s orientation and specify accordingly, not by catalog position.
Window Maintenance & Care
Maintenance on existing impact-rated units includes seal inspection, hardware adjustment, and weep-hole clearing - critical in Delray Beach, where salt buildup blocks drainage channels and traps moisture in the frame. We document condition with photos and note when corrosion has progressed past the point of maintenance, giving you a timeline for replacement rather than an urgent sales pitch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Delray Beach
We install from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by what the opening requires, not by what is in stock. For Delray Beach’s impact-rated replacements, we typically draw from PGT’s WinGuard line, CGI’s Estate Collection, and CWS’s ARIA series, each with Miami-Dade NOA numbers and design pressures we verify against your specific wind zone. We do not sell hurricane shutters; our comparison is straightforward - impact-rated windows are permanent protection, with no panels to hang, no storage, and no ladder work in a storm warning.
Common Window Replacement Problems We See in Delray Beach Homes
- Original 1970s-80s aluminum slider frames corrode from dual salt exposure. The Intracoastal Waterway runs through Delray Beach, so properties get salt-laden air from east and west. Atlantic spray hits oceanfront and near-ocean homes; ICW breezes carry salt inland to Lake Ida and Chatelaine. The result is aluminum frame oxidation that outpaces inland Palm Beach County communities by years.
- Single-pane glass fails to meet current Florida Building Code. Original jalousie windows and horizontal sliders in Kings Point and similar 55-plus communities have no impact rating and no insulating value. Replacement is not optional for code compliance; it’s mandatory for any permitted work.
- Improperly specified replacement units corrode prematurely. Cheap inland-spec windows installed with zinc-plated fasteners and unsealed joints fail within seasons in Delray Beach’s environment. The impact-rated glazing itself is fine; it’s the hardware and frame perimeter that surrender first.
- Historic district non-compliance triggers rework. Crews working in Old School Square or Del Ida Park without Historic Preservation Board approval install standard impact frames, then must rip them out when sightline widths and simulated divided lites don’t match period character. This adds weeks and cost to jobs that should have been routine.
What Window Replacement Costs in Delray Beach
| Project Type | Price Range (Installed) |
|---|---|
| Standard impact window (single-hung or slider) | $800 - $1,500 |
| Impact single-hung, mid-size opening | $900 - $1,800 |
| Large or custom opening (picture windows, geometric) | $2,500 - $5,000 |
| Whole-home package (typical 3/2 CBS) | $8,000 - $25,000+ |
What moves the price in Delray Beach: opening count, wind zone exposure (oceanfront vs. inland), floor height (hoist requirements above first floor), frame material (vinyl, aluminum, or composite), and whether the job is in a historic district requiring custom sightline replication. Coastal-spec hardware - stainless or hot-dip galvanized fasteners, marine-grade finishes, sealed perimeter joints - adds $40-$80 per opening over inland-spec, but prevents the three-year failure cycle we see on cheap replacements.
Every engagement begins with a measured survey you keep. The written quote cannot differ from that document. Call (754) 205-3820 for your free in-home measure and written quote.
Pricing for Window Replacement in Delray Beach, FL
A typical full-frame impact replacement on a 1970s Delray Beach condo runs $1,100-$1,600 per opening, including coastal-spec fasteners and proper sill pan integration. Insert replacements, where the existing frame is viable, run $900-$1,400. Energy-efficient upgrades with Low-E/argon IGUs add $100-$200 per unit. Historic district jobs with custom sightlines and simulated divided lites start at $2,000 per opening due to fabrication lead time and board approval cycles.
We do not quote from photos or descriptions. Haven Clause 1 requires a measured survey. The price we write is the price you pay - no change orders, no surprises. Bring us a competitor’s written estimate and we’ll review it at no charge.
Florida Pays You Back
Several programs reduce the net cost of impact-rated window replacement in Delray Beach. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades - the program sets eligibility and funding availability. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit provides 30% of product cost, up to $600 per year, on qualifying energy-efficient units. After installation, a wind-mitigation inspection ($75-$150) can qualify you for windstorm premium credits averaging around 25% on the windstorm portion of your policy - final numbers are set by your carrier. We document every product approval number and installation detail to support your claims; the paperwork travels with the job.
We Also Serve Cities Near Delray Beach
Our crews work throughout southern Palm Beach and northern Broward counties, including Window Replacement in Delray Beach and surrounding Boca Raton, Deerfield Beach, Coconut Creek, and Pompano Beach. Each city’s building department, wind zone, and housing stock gets the same measured-survey treatment - no template quotes, no assumptions from one jurisdiction to the next.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Delray Beach
Yes, impact-rated windows are mandatory for any replacement in Delray Beach because the entire city falls within Florida’s wind-borne debris region. Your original single-pane aluminum sliders carry no impact rating and cannot be legally installed as replacements - they also leak air, fail to block noise, and corrode from salt exposure. Call (754) 205-3820 for a free measured survey and written quote on code-compliant units.
Delray Beach’s geography brackets properties with salt-laden air from both the Atlantic Ocean to the east and the Intracoastal Waterway to the west, while Wellington sits 15 miles inland with minimal marine exposure. The dual salt source accelerates aluminum oxidation and seal failure faster than any inland Palm Beach County community. We specify coastal-spec materials - stainless fasteners, marine-grade finishes, sealed joints - specifically for this environment. Call (754) 205-3820 for an assessment of your current frames.
Yes, a wind-mitigation inspection after installing impact-rated windows with Miami-Dade or Florida Product Approval numbers typically qualifies for premium credits averaging around 25% on the windstorm portion of your policy, though your carrier sets the final number. The inspection costs $75-$150 and must document opening protection, deck attachment, and roof-to-wall connections. We provide the product approval documentation and installation photos your inspector needs. Call (754) 205-3820 to schedule replacement and we’ll coordinate the paperwork.
Full-frame replacement removes the existing frame, sill, and jamb to the rough opening, necessary when original aluminum frames are corroded or undersized by current code - common in 1970s Delray Beach construction. Insert replacement fits a new unit inside the existing frame, preserving trim and reducing cost, but only works when the frame is structurally sound and properly flashed. We probe and measure before recommending either path. Call (754) 205-3820 for a free evaluation.
Yes, the Old School Square Historic Arts District and Del Ida Park Historic District require Historic Preservation Board approval before window replacement, often mandating custom impact frames with simulated divided lites and specific sightline widths to match period character. This approval cycle adds weeks and cost compared to standard replacements, and crews who skip this step face removal orders. We handle the board submission as part of our scope. Call (754) 205-3820 for a timeline and written quote.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Delray Beach since 2012 under the Haven Standard.
Window Replacement in Nearby Areas
Six Reasons Homeowners Choose Sightline Windows & Doors Parkland
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Parkland Services